Pre-Spud Checklist # 2

Safety

 

Fire fighting equipment in place & tested

 

Emergency showers, eyewash stations & P.P.E in good condition

 

All equipment connected to earring…

Pre-Spud Checklist # 2

SAFETY

Y / N

Fire fighting equipment in place & tested

 

Emergency showers, eyewash stations & P.P.E in good condition

 

All equipment connected to earring…

Pre-spud Checklist # 4

  • Drains clear to flow to rio negro
  • Ditches between pits to grout with old cement
  • 42” pipe cut approx 0.3m above bottom of cellar and cellar cut where necessary to assist flow
  • Cellar clean, cellar jet…

Pre-spud Checklist # 3

- weatherford – 2 tongs & power units. Both 20” and 13/38

- rio negro grouted

- drains / channels preferably clear prior to spotting equipment

- 40” casing to cut. And corregate walls on cellar,…

Rig move preparation Checklist

The ability to monitor and circulate the well must be retained until the seal flange and lower master valve is installed and pressure tested

  • Mud logging unit must remain to continue monitoring…

Pre-spud Checklist # 1

  • the rig has to be moved during the defrosting period (March-April), gravel or slabs must be used for the road.
  • The mast will have been inspected after laying down on the previous location to avoid…

36" hole section preparation - Checklist

  • Ensure derrick is level
  • 36” bit on floor
  • Sufficient 9” drill collars, on rack, strapped  (with top drive picked up prior spud)
  • Sufficient 8 ½” drill collars, x/o to reach csg point on rack,…